With a rigorously minimal design, Planet combines the extraordinary compactness and solidity of its shape with an innovative spherical lens capable of projecting light in a precise and defined way; the version for ceiling installation creates a wide and clear circular light beam for a performant lighting of paths, porches and covered areas; the version for wall installation illuminates the vertical surface with wide and extraordinarily sharp beams, creating extremely precise and clean grazing light effects. The single emission for wall mounting versions can be installed both for upwards and downwards lighting. Planet is made of die-cast aluminum and is equipped with a drilled fixing bracket for dual in/out connection; this can be installed on the wall or ceiling separately from the optical body for an easier electrical connection to the system and fixing to the wall or ceiling.
Thanks to its particular spherical lens, Planet illuminates the wall with extremely sharp and defined light beams.
The Shock series is particularly suitable for the lighting of paths, facades and outdoor covered areas. Made of die-cast aluminum, the luminaires is available in three different versions: ceiling downlighter, single and dual emission wall mounting; all versions can be installed quickly thanks to the fixing base that can be separated from the body, and are complete with die-cast front ring with transparent safety tempered glass. Shock is equipped with drivers in the body of the fixture, high efficiency CoB Led and roto-symmetrical 40° optic with curved facets. It is available in matt white and matt grey colour.
Davon is an outdoor lighting fixture that can be installed on the wall for grazing light effects; available in the double version mono and dual emission, Davon distinguishes itself for its body made of a single piece of polished cement and for its extremely clean and minimal lines. The protective glass is mounted perfectly flush with the front surface and the fixing bracket is entirely hidden into the body of the fixture. Davon is equipped with integrated driver and CoB Led, suitably placed backwards so as to limit direct glare.
Made of die-cast aluminum, the luminaires of the series Miami are available in two cylindrical or square formal variants; both are dual emission, and can be installed on the wall to illuminate small facades with grazing light effects, both upwards and downwards. All versions allow a quick installation thanks to the fixing plate that can be separated from the body and are equipped with a die-cast front ring, complete with transparent safety glass. Equipped with GU10 socket, Miami lighting fixtures allow the replacement of the led source, thus ensuring a long-lasting installation
Outdoor wall lamp in die-cast aluminium with protective glass. The light beam of the 2 light sources is upwarddownward oriented.
Made of die-cast aluminum, Mark is designed for wall installations in outdoor; it stands out for its minimal design, for its particularly compact dimensions and for its three available finishes; available in white, grey and rust, Mark is indeed particularly suitable for the lighting of paths or rest areas in residential areas. Available in two different versions with mono or dual emission, it is equipped with a transparent protection glass, perfectly flush mounted with the front. Mark is equipped with a standard GU10 socket that allows the replacement of the LED source, thus making the fixture more durable over time; the source can be replaced easily by temporarily removing the body of the appliance from its wall fixing bracket.
Boxer is an outdoor fixture that can be installed on the wall to obtain grazing facades light effects; cubic in shape, it is extremely minimal and it suits to any architectural style by camouflaging itself on the facade. Made of die-cast aluminum, Boxer is available in two different configurations for mono or dual emission; it is equipped with frame kit, supplied as accessories included, to be inserted inside the optical compartment to shape the emission beam, thus obtaining particular grazing light effects. Boxer is available in the finishes matt grey and matt white; it is equipped with driver and CoB led, and can be easily installed thanks to the fixing plate that can be separated from the body.
Boxer is supplied complete with specific frame kit; by inserting the frame kit inside the optical compartment, it is possible to shape the beam emitted to obtain a grazing blade light effect
Wally is a wall mounted luminaire suitable for grazing lighting of facades and vertical surfaces; the body of the fixture, made of die-cast aluminum, is complete with two independent CoB LEDs and is configured to obtain a dual emission, projecting the light both upwards and downwards; both emissions can be gradually obscured thanks to a slider system which, sliding sideways, allows to shield the light by acting independently on both emissions. This solution enables the shaping of both beam openings from 0° to 100°, thus adjusting the effect of grazing light even after the installation. Thanks to its fixing bracket, completely hidden and independent of the main body of the appliance, Wally can be installed quickly and easily.
Wally is equipped with a pair of lateral sliders for each optic; these have the function of gradually obscuring the light emitted, sliding laterally on the protection glass of the two optical compartments; by adjusting the position of the sliders, it is possible to gradually reduce the light beam on both sides of the fixture independently of each other, until it completely darkens the light; thanks to this system, Wally creates tailor-made light beams, adjusting their emission between 0 ° and 100 ° to design customized light effects according to the specific needs of the user.
Win is made of die-cast aluminum and is suitable for a grazing lighting of walls and facades; it is suitable for wall installation and is equipped with an integrated driver and high efficiency LED sources. Win is available in the three colours white, grey and anthracite, and in the two different versions up/down and up/down with diffuser; both configurations are characterized by adjustable flaps, positioned in correspondence with both up and down emissions of the luminaire, which allow to gradually darken the light beams emitted, personalizing the luminous effect on the wall. The version with diffuser has an additional third led which, through the opal front glass, illuminates the surrounding area with soft and diffused light. Win can be installed on the wall thanks to the base independent from the body which facilitates the correct alignment of the fixing.
Win is equipped with rotating flaps integrated in the fixture, which act as real user-adjustable cut-offs; these allow either to enlarge or tighten the light beam even once the luminaire is installed, shielding the emission according to the desired light effect; the cut-off system is present on both uplight and downlight emissions and on all versions of Win
The WIN version with diffuser illuminates the surrounding area with soft and diffused light thanks to a specific LED positioned on the front and shielded by a peculiar opal screen.
Brick is an outdoor projector made of painted die-cast aluminum. It distinguishes itself for two possible installation ways: ground or wall installation. Brick is suitable therefore for the vertical lighting of facades and walls creating grazing light effects or wide beams of light projected horizontally. The shape of the body of the fixture allows to shield the light to limit direct glare; the protection glass is flush mounted with the body to prevent stagnation of dust on its surface. Complete with driver included in the body and high efficiency CoB led, Brick can be quickly installed thanks to its fixing base, which can be separated from the body and already drilled for In/Out wiring.
Sheld can be installed on the wall and is particularly suitable for outdoor systems where diffused lighting is required. Realized of die-cast aluminum, it is equipped with a high efficiency CoB led and is particularly suitable for the lighting of facades on which it is installed or for the lighting of porches and canopies with indirect light.
Onda is made of matt white painted aluminium. It has a diffusing glass screen and is equipped with a high efficiency SMD LED source and integrated driver. It is ideal for indirect light effects and is able to illuminate the surrounding area with diffused light. Thanks to the degree of protection IP54, it can be installed in indoor and outdoor.
Gard Wall is made of die-cast aluminum, it can be installed on the wall and it is equipped with a CoB Led completely hidden from any view allowing the lighting of the wall without any type of direct glare. It can be perfectly combined with the bollards of the homonymous Gard series thanks to its particular design.
Perth is made of die-cast aluminum and can be installed on the wall. Its optical head, suitably inclined, can light at the best the area facing it. It is complete with a glass diffuser screen that diffuses the light by illuminating the surrounding area with soft light, it is equipped with a SMD Led source and with an integrated driver; Complete the range of homonymous bollards.
Combined with Dado series of bollards, Dado can be installed on the wall and is particularly suitable for the lighting of outdoor areas, pedestrian walkways and rest areas. Dado can light the whole surrounding area thanks to its particular optical module that combines different light reflections, obtaining particularly uniform illumination.
The Connection series offers a wide range of outdoor luminaires to be installed on facàdes; The body of the fixture is available in two different versions: with two openings for uplight / downlight effects or with three openings for diffused light effects. Made of die-cast painted aluminum, the fixtures of the series Connection can be easily installed thanks to their base which acts as a wall fixing plate; they are equipped with E27 lamp holder or with SMD Led and driver. They have opal screens and are available in three colours white, grey and rust.
Flavin can be installed on the wall or on the ceiling for the lighting of outdoor environments such as porches, small balconies, facades and condominium areas with perfectly diffused light. the body of the base, made of die-cast aluminum, is fixed directly to the wall or ceiling; the led source is protected by a double opal screen to obtain maximum light diffusion. Flavin is equipped with 10 W SMD LEDs and powered by mains voltage and does not require a remote driver.
Oregon is a wall luminaire characterized by its compactness and its clean and minimal design; it allows to illuminate walls and facades with grazing light, both direct and indirect, softly diffused thanks to the opal screens. It is made of a single piece of aluminum and is equipped with a CoB Led and integrated driver.
Characterized by its strictly squared shape, Dankan is installed on the wall and, thanks to its opal screen made in a unique piece, can light with grazing, soft and diffused light. Dankan is equipped with SMD Led and driver integrated in the body.
Eclis can be installed on the wall; it is particularly suitable for indoor and outdoor environments and it is characterized by its extremely minimal shape and its particularly compact dimensions. It is equipped with a swivel head which, rotating on itself, allows the light to gradually fade, personalizing the luminous effect on the wall. It is made with a painted aluminum body and is equipped with a CoB LED source and integrated driver.
Cam is a mini outdoor projector that can be installed on the wall whose head can be oriented 180 °. Thanks to Cam it is therefore possible to obtain grazing light effects on the wall, which can be oriented as desired. It is equipped with CoB Led, integrated driver and wide beam optics.
Effect is a wall product specific for outdoor installations; the body is made of die-cast aluminum and is equipped with opal polycarbonate screens that spread the light evenly in the surrounding area. It is available in two different configurations, both equipped with an E27 socket for LED or FBT sources (not included).
Espirit consists of an aluminum body and an opal polycarbonate screen that diffuses the light uniformly in the surrounding area. The particular shape of the structure shields the light upwards. Espirit is equipped with E27 socket for LED or FBT sources (not included).
Poker is characterized by its cubic shape and the large opal polycarbonate screen that diffuses the light in a perfectly uniform way and makes it particularly suitable for the lighting of external areas, in particular paths and condominium areas. Made of die-cast aluminum, it is equipped with an E27 socket for LED or FBT sources (not included).
Smok is a steplight that stands out for its compact dimensions and extremely reduced thickness. It can be installed on the surface without having to drill holes or breaks in the wall. It is equipped with specific SMD LED and integrated driver.
Grenada is a wall or ceiling mounted luminaire suitable for outdoor installations; it is made of die-cast aluminum with glass screen which, internally satin-finished, diffuses uniformly the light in the surrounding area. Grenada is complete with E27 socket for LED or FBT sources (not included).
Angolo is a wall or ceiling mounted fixture suitable for the lighting of small outdoor areas with diffused light; entirely polycarbonate made, it is complete with an opal screen that diffuses in a uniform way the light in the surrounding area. Angolo is equipped with an E27 connection for LED or FBT sources (not included).